Skip to main content

Comments

20 comments

Date Votes
  • Leonidas Savvides
    I restarted Apache but Not loading before upload data updated cPanel to >>> CENTOS 7.6 kvm [ip-160-153-XXX-X] v84.0.6 Load Averages: 0.02 0.05 0.05
    0
  • Leonidas Savvides
    here is some file structure
    0
  • Leonidas Savvides
    [username@ip-160-153-XXX-XXX/]$ cd home [username@ip-160-153-XXX-XXX home]$ cd username/ [username@ip-160-153-XXX-XXX username]$ ls ls: cannot open directory .: Permission denied [username@ip-160-153-XXX-XXX username]$
    0
  • Leonidas Savvides
    leonidas@PC8:~$ ping 160.153.XXX.X PING 160.153.XXX.X (160.153.XXX.X) 56(84) bytes of data. 64 bytes from 160.153.XXX.X: icmp_seq=1 ttl=48 time=82.6 ms 64 bytes from 160.153.XXX.X: icmp_seq=2 ttl=48 time=82.6 ms 64 bytes from 160.153.XXX.X: icmp_seq=3 ttl=48 time=83.3 ms 64 bytes from 160.153.XXX.X: icmp_seq=4 ttl=48 time=83.9 ms 64 bytes from 160.153.XXX.X: icmp_seq=5 ttl=48 time=83.6 ms ^C --- 160.153.235.253 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 82.644/83.259/83.971/0.643 ms leonidas@PC8:~$
    0
  • cPanelLauren
    Hello, If you've not disabled mod_userdir protection on the server, accessing links like this will not function. You need to go to WHM>>Security Center >> Apache mod_userdir Tweak you can manage it from there.
    0
  • Leonidas Savvides
    I found below... well how to do this: To use mod_userdir, you must disable mod_ruid2, mod_itk, and mod_passenger and recompile EasyApache. ???? Apache mod_userdir Tweak mod_userdir is disabled Web server processes on this system currently run as the user. For security reasons, the system disabled mod_userdir. Any changes that you make in this interface will not take effect until you enable mod_userdir. To use mod_userdir, you must disable mod_ruid2, mod_itk, and mod_passenger and recompile EasyApache. Apache httpd"s mod_userdir makes URLs like " resolve to the indicated user"s (for example, the user "fred""s) primary web virtual host. In the above scenario, the transferred data counts against the bandwidth limit for the user that owns "example.com", not against "fred""s bandwidth limit. This is often an undesirable behavior. WHM"s mod_userdir Protection feature addresses this problem by restricting mod_userdir to URLs whose users own the URL"s domains.
    0
  • cPanelLauren
    You can manage these through EasyApache 4 by going to WHM>>Software>>EasyApache 4. You'd need to remove mod_ruid2 and mod_passenger if you're not using them, and install mod_userdir
    0
  • Leonidas Savvides
    mod_ruid2, mod_itk, and mod_passenger These three for what purpose are, what assist for?
    0
  • cPanelLauren
    mod_ruid2 information can be found here: Apache Module: ModRuid2 - EasyApache - cPanel Documentation (disregard any instructions on how to install/uninstall for easyapache 3) mod_itk is discussed here: Apache Module: MPM ITK - EasyApache 4 - cPanel Documentation mod_passenger information is here: Application Manager - Version 84 Documentation - cPanel Documentation
    0
  • Leonidas Savvides
    Apache mod_userdir Tweak mod_userdir is disabled >>> make enabled this, required for webserver to serve eg 7 domains / sites...? or web server can work even this is disabled, and this is only for urls domain/~fred...?
    0
  • cPanelLauren
    The webserver will function without issue without mod_userdir it's only utilized for using urls like domain.tld/~user
    0
  • Leonidas Savvides
    how to understand a site works... --- migrate from old server to new --- changing only dns IP... I haven't had to make working domain/~fred...? what other solution exist?
    0
  • cPanelLauren
    Hello, The best and most reliable way to confirm that a site functions normally after migration is to modify your local hosts file. We wrote some instructions on how to do this here:
    0
  • Leonidas Savvides
    What if, the same server serves 10 domains/sites???
    0
  • cPanelLauren
    You'd need to enter each domain with the corresponding IP into the hosts file. How many servers isn't relevant, all this does is essentially tell your local machine where to look for that site.
    0
  • Leonidas Savvides
    this works without mod_userdir enabled ??????? the web browser will request from the server with IP [mine server IP] the site and server will understand what site url/domain to serve ... even
    0
  • cPanelLauren
    Modifying the hosts file will work without anything enabled on the server. Modifying the hosts file has no affect on your server, all it does is tell your local machine where to find the domain - then your server performs as it would if DNS for the domain was live. You cannot use
    0
  • Leonidas Savvides
    jennysprivate.institute I want to change server --- this was in the old server now wanted to be pointed to the new SSD server, how? CPanel both old CentOS 6 new Cent OS 7 I set the new server but still points to ping old server --- even changed in my provider domain IP DNS... well ? -11-07_15-18-53 (2).png">61965
    0
  • cPanelLauren
    You'll need to wait for propagation to complete as well as clear any local caching. I get the 160.153 IP address when I ping the domain and the nameservers.
    0
  • Leonidas Savvides
    Needed change and Host names and worked OK
    0

Please sign in to leave a comment.

Didn't find what you were looking for?

New post