After a VPS snapshot restore I have an additional eth0:cp1 causing NAT issues with auto ssl

I had to made a restore from a snapshot in a google compute engine VPS, but now in ifconfig I see the same internal IP address both on eth0 and eth0:cp1, I started to receive auto ssl messages " Loopback NAT on this IP address appears to be defective " ifconfig: eth0: flags=4163 mtu 1460 inet 10.142.0.14 netmask 255.255.255.255 broadcast 10.142.0.14 inet6 fe80::4001:aff:fe8e:e prefixlen 64 scopeid 0x20 ether 42:01:0a:8e:00:0e txqueuelen 1000 (Ethernet) RX packets 327969 bytes 242538668 (231.3 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 399658 bytes 717565245 (684.3 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0:cp1: flags=4163 mtu 1460 inet 10.142.0.14 netmask 255.255.255.0 broadcast 10.142.0.255 ether 42:01:0a:8e:00:0e txqueuelen 1000 (Ethernet) Running ip addr | grep inet I get: inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host inet 10.142.0.14/32 brd 10.142.0.14 scope global dynamic eth0 inet 10.142.0.14/24 brd 10.142.0.255 scope global eth0:cp1 inet6 fe80::4001:aff:fe8e:e/64 scope link Why do I have 2 internal local IP's here when I only have 1 physical local IP and 1 external IP in the VPS? In WHM, if I go to "Show or Delete Current IP Addresses" : NAT Mode Interface Local IP Notes Public IP eth0:cp1 10.142.0.14 Main/shared IP for: xxxxxxx 104.196.xxx.xxx I really don't know how to fix this, I run this server for web applications, network administration is not my thing, any help would be appreciated.