EXIM Configuration Questions

Hi I need some help on how to integrate the below MailArchiva ISP Edition This is setup on a separate server running CentOS release 6.5 WHM Server Running exim-4.82 I have tried the link below by adding the mentioned solution to the existing exim.conf file ? Per the mailarchiva tech I need to configured EXIM to send SMTP traffic /https://www.mailarchiva.com/help/display/MAIL/Exim My current exim config
######################################################################
#                      ROUTERS CONFIGURATION                         #
#            Specifies how remote addresses are handled              #
######################################################################
#                          ORDER DOES MATTER                         #
#  A remote address is passed to each in turn until it is accepted.  #
######################################################################

# Remote addresses are those with a domain that does not match any item
# in the "local_domains" setting above.




deliver_local_outside_jail:
    driver = manualroute
    domains = +local_domains
    # users outside the jail will not be in /etc/passwd => We need to check if $local_part is in /jail_owner
    # we can't just check to see if they exist
    # because we still want to be able to mail root
    condition = ${if exists {/jail_owner}{1}{0}}
    transport = remote_smtp
    route_list = "* 127.0.0.1"
    # self = send allows us to send outside the jail
    # we make sure /home/virtfs does not exist before we get here 
    # to be safe
    self = send


# Place holder

democheck:
    driver = redirect
    require_files = "+/etc/demouids"
    condition = "${if eq {${lookup {$originator_uid} lsearch {/etc/demouids} {$value}}}{}{false}{true}}"
    allow_fail
    data = :fail: demo accounts are not permitted to relay email


archive_incoming_email_domain_method:
    driver = accept
    domains = +user_domains
    router_home_directory = ${extract{5}{::}{${lookup passwd{${lookup{$domain}lsearch {/etc/userdomains}{$value}}}{$value}}}}
    require_files = "$home/etc/$domain/archive/incoming"
    condition = ${perl{should_archive_incoming_domain_message}}
    headers_add = "${perl{archive_headers}{incoming_domain}}"
    unseen
    no_verify
    transport = archiver_incoming_domain_method



archive_incoming_email_local_user_method:
    driver = accept
    domains = $primary_hostname
    check_local_user
    condition = ${perl{should_archive_incoming_localuser_message}}
    unseen
    no_verify
    headers_add = "${perl{archive_headers}{incoming_localuser}}"
    transport = archiver_incoming_local_user_method



archive_outgoing_email:
    driver = accept
    condition = ${perl{should_archive_outgoing_message}}
    unseen
    no_verify
    headers_add = "${perl{archive_headers}{outgoing}}"
    transport = archiver_outgoing



######################################################################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
#                       ORDER DOES NOT MATTER                        #
#     Only one appropriate transport is called for each delivery.    #
######################################################################

# A transport is used only when referenced from a director or a router that
# successfully handles an address.


# This transport is used for delivering messages over SMTP connections.

begin transports


# Place holder


remote_smtp:
  driver = smtp
  interface = ${if exists {/etc/mailips}{${lookup{$original_domain}lsearch{/etc/mailips}{$value}{${lookup{$sender_address_domain}lsearch{/etc/mailips}{$value}{${lookup{${perl{get_sender_from_uid}}}lsearch*{/etc/mailips}{$value}{}}}}}}}}
  helo_data = ${if exists {/etc/mailhelo}{${lookup{$original_domain}lsearch{/etc/mailhelo}{$value}{${lookup{$sender_address_domain}lsearch{/etc/mailhelo}{$value}{${lookup{${perl{get_sender_from_uid}}}lsearch*{/etc/mailhelo}{$value}{$primary_hostname}}}}}}}{$primary_hostname}}



dkim_remote_smtp:
  driver = smtp
  interface = ${if exists {/etc/mailips}{${lookup{$original_domain}lsearch{/etc/mailips}{$value}{${lookup{$sender_address_domain}lsearch{/etc/mailips}{$value}{${lookup{${perl{get_sender_from_uid}}}lsearch*{/etc/mailips}{$value}{}}}}}}}}
  helo_data = ${if exists {/etc/mailhelo}{${lookup{$original_domain}lsearch{/etc/mailhelo}{$value}{${lookup{$sender_address_domain}lsearch{/etc/mailhelo}{$value}{${lookup{${perl{get_sender_from_uid}}}lsearch*{/etc/mailhelo}{$value}{$primary_hostname}}}}}}}{$primary_hostname}}
  dkim_domain = $sender_address_domain
  dkim_selector = default
  dkim_private_key = "/var/cpanel/domain_keys/private/${dkim_domain}"
  dkim_canon = relaxed



# This transport is used for local delivery to user mailboxes. By default
# it will be run under the uid and gid of the local user, and requires
# the sticky bit to be set on the /var/mail directory. Some systems use
# the alternative approach of running mail deliveries under a particular
# group instead of using the sticky bit. The commented options below show
# how this can be done.



local_delivery:
    driver = appendfile
    delivery_date_add
    envelope_to_add
    directory = "${extract{5}{:}{${lookup passwd{$local_part}{$value}}}}/mail"
    maildir_use_size_file
    maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash$)[^\@]+)$
    maildir_format
    maildir_tag = ,S=$message_size
    quota_size_regex = ,S=(\d+)
    mode = 0660
    return_path_add
    group = ${extract{3}{:}{${lookup passwd{$local_part}{$value}}}}
    user = $local_part
    shadow_condition = ${if exists {${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/.cpanel/rim/bis/$local_part}{1}{0}}
    shadow_transport = rim_bis_notifier_local_user



rim_bis_notifier_local_user:
    driver = pipe
    headers_only
    command = /usr/local/cpanel/bin/rim_bis_notifier "${local_part}"
    group = ${extract{3}{:}{${lookup passwd{$local_part}{$value}}}}
    user = $local_part
    log_output = true
    current_directory = "/tmp"
    return_fail_output = true
    return_path_add = false


local_delivery_spam:
  driver = appendfile
  delivery_date_add
  envelope_to_add
  directory = "${extract{5}{:}{${lookup passwd{$local_part}{$value}}}}/mail/.spam"
  maildir_use_size_file
  maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash$)[^\@]+)$
  maildir_format
  maildir_tag = ,S=$message_size
  quota_size_regex = ,S=(\d+)
  group = ${extract{3}{:}{${lookup passwd{$local_part}{$value}}}}
  mode = 0660
  return_path_add
  user = $local_part


# This transport is used for handling pipe deliveries generated by alias
# or .forward files. If the pipe generates any standard output, it is returned
# to the sender of the message as a delivery error. Set return_fail_output
# instead of return_output if you want this to happen only when the pipe fails
# to complete normally. You can set different transports for aliases and
# forwards if you want to - see the references to address_pipe below.


address_directory:
    driver        = appendfile
    maildir_tag = ,S=$message_size
    quota_size_regex = ,S=(\d+)
    maildir_format
    maildir_use_size_file
    maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash$)[^\@]+)$
    mode = 0660
    delivery_date_add
    envelope_to_add
    return_path_add

address_pipe:
  driver = pipe
  return_output

virtual_address_pipe:
  driver = pipe
  group = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
  return_output
  user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"

jailed_address_pipe:
  driver = pipe
  force_command
  command = /usr/local/cpanel/bin/jailexec $address_pipe
  return_output

jailed_virtual_address_pipe:
  driver = pipe
  force_command
  command = /usr/local/cpanel/bin/jailexec $address_pipe
  user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
  group = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
  return_output

cagefs_address_pipe:
  driver = pipe
  force_command
  command = /bin/cagefs_enter $address_pipe
  return_output

cagefs_virtual_address_pipe:
  driver = pipe
  force_command
  command = /bin/cagefs_enter $address_pipe
  user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
  group = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
  return_output


# This transport is used for handling deliveries directly to files that are
# generated by aliassing or forwarding.

address_file:
  driver = appendfile
  delivery_date_add
  envelope_to_add
  return_path_add


# This transport is used for handling autoreplies generated by the filtering
# option of the forwardfile director.


virtual_userdelivery_spam:
  driver = appendfile
  delivery_date_add
  envelope_to_add
  directory = "${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/mail/${domain}/${local_part}/.spam"
  maildir_use_size_file
  maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash$)[^\@]+)$
  maildir_format
  maildir_tag = ,S=$message_size
  quota_size_regex = ,S=(\d+)
  mode = 0660
  quota = "${if exists{${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/etc/${domain}/quota} {${lookup{$local_part}lsearch*{${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/etc/${domain}/quota}{$value}}} {}}"
  quota_is_inclusive = false
  quota_directory = "${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/mail/${domain}/${local_part}"
  return_path_add
  user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
  group = ${extract{3}{:}{${lookup passwd{${lookup{$domain}lsearch* {/etc/userdomains}{$value}}}{$value}}}}



virtual_userdelivery:
  driver = appendfile
  delivery_date_add
  envelope_to_add
  directory = "${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/mail/${domain}/${local_part}"
  maildir_use_size_file
  maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash$)[^\@]+)$
  maildir_format
  maildir_tag = ,S=$message_size
  quota_size_regex = ,S=(\d+)
  mode = 0660
  quota = "${if exists{${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/etc/${domain}/quota} {${lookup{$local_part}lsearch*{${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/etc/${domain}/quota}{$value}}} {}}"
  quota_is_inclusive = false
  quota_directory = "${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/mail/${domain}/${local_part}"
  return_path_add
  user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
  group = ${extract{3}{:}{${lookup passwd{${lookup{$domain}lsearch* {/etc/userdomains}{$value}}}{$value}}}}
  shadow_condition = ${if exists {${extract{5}{:}{${lookup passwd{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}{$value}}}}/.cpanel/rim/bis/$local_part@$domain}{1}{0}}
  shadow_transport = rim_bis_notifier_virtual_user


rim_bis_notifier_virtual_user:
  driver = pipe
  headers_only
  command = /usr/local/cpanel/bin/rim_bis_notifier "${local_part}@${domain}"
  user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
  group = ${extract{3}{:}{${lookup passwd{${lookup{$domain}lsearch* {/etc/userdomains}{$value}}}{$value}}}}
  log_output = true
  current_directory = "/tmp"
  return_fail_output = true
  return_path_add = false


address_reply:
driver = autoreply


archiver_incoming_local_user_method:
  driver = appendfile
  delivery_date_add
  envelope_to_add
  user = $local_part
  group = ${extract{3}{:}{${lookup passwd{$local_part}{$value}}}}
  directory = "${extract{5}{::}{${lookup passwd{$local_part}{$value}}}}/mail/archive/${perl{get_incoming_domain}}/.incoming.${perl{YYYYMMDDGMT}}"
  maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash$)[^\@]+)$
  maildir_format
  maildir_tag = ,S=$message_size
  maildir_use_size_file
  quota_size_regex = ,S=(\d+)
  mode = 0660
  return_path_add


archiver_incoming_domain_method:
  driver = appendfile
  delivery_date_add
  envelope_to_add
  user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
  group = ${extract{3}{:}{${lookup passwd{${lookup{$domain}lsearch* {/etc/userdomains}{$value}}}{$value}}}}
  directory = "$home/mail/archive/$domain/.incoming.${perl{YYYYMMDDGMT}}"
  maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash$)[^\@]+)$
  maildir_format
  maildir_tag = ,S=$message_size
  maildir_use_size_file
  quota_size_regex = ,S=(\d+)
  mode = 0660
  return_path_add


archiver_outgoing:
  driver = appendfile
 delivery_date_add
  envelope_to_add
  user = ${perl{get_outgoing_sender_sysuser}}
  group = ${extract{3}{:}{${lookup passwd{${perl{get_outgoing_sender_sysuser}}}{$value}}}}
  directory = "${extract{5}{::}{${lookup passwd{${perl{get_outgoing_sender_sysuser}}}{$value}}}}/mail/archive/${perl{get_outgoing_sender_domain}}/.${perl{get_outgoing_archive_directory}}.${perl{YYYYMMDDGMT}}"
  maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash$)[^\@]+)$
  maildir_format
  maildir_tag = ,S=$message_size
  maildir_use_size_file
  quota_size_regex = ,S=(\d+)
  mode = 0660
  return_path_add
cPanelMichael
July 31, 2014 13:17
Hello :) Please ensure that any custom changes you make to the Exim configuration are completed through: "WHM Home " Service Configuration " Exim Configuration Manager " Advanced Editor" This will ensure the changes are preserved. Note that you may need to consult with the support for the application you are using for assistance with the exact changes you are required to make. Thank you.
EXIM Configuration Questions

Comments

Didn't find what you were looking for?
