Skip to main content

Issues With Memcached When Running With Socket

Comments

8 comments

  • User Avatar
    cPanelMichael
    It seems like it starts up and runs ok, service memcached status is fine. But when trying to start Railgun I notice it fails because it cannot connect to Memcached.

    Hello :) Could you paste the specific failure message? Thank you.
    0
  • User Avatar
    Dradden45
    Hi :) Yeah that would help :P
    Starting railgun (via systemctl): Job for railgun.service failed because a configured resource limit was exceeded. See "systemctl status railgun.service" and "journalctl -xe" for details.
    Railgun successfully backgrounded, ensuring proper startup... [FAILED] Error starting Railgun as a daemon. Running in foreground... su (to railgun) root on none Error starting: Error connecting to memcached server /tmp/memcached.sock: dial unix /tmp/memcached.sock: no such file or directory [FAILED] PID 572965 read from file /var/run/railgun/railgun.pid does not exist or is a zombie. Failed to start LSB: Railgun listener. Unit railgun.service entered failed state. railgun.service failed.
    root@s1 [~]# service memcached status Redirecting to /bin/systemctl status memcached.service ? memcached.service - Memcached Loaded: loaded (/usr/lib/systemd/system/memcached.service; disabled; vendor preset: disabled) Active: active (running) since Thu 2016-02-11 21:03:56 EST; 4min 21s ago Main PID: 572604 (memcached) CGroup: /system.slice/memcached.service ??572604 /usr/bin/memcached -u memcached -p -m 512 -c 1024
    There is no /tmp/memcached.sock memcached config
    #PORT="11211" USER="memcached" MAXCONN="1024" CACHESIZE="512" OPTIONS="" -s /tmp/memcached.sock -a 0777
    0
  • User Avatar
    Dradden45
    I also have issues tracking down the pid file for memcached. It should be in /var/run or am I mistaken?
    0
  • User Avatar
    cPanelMichael
    What method did you use to install Memcached? Thank you.
    0
  • User Avatar
    Dradden45
    Hi Michael,
    yum install memcached.x86_64 php-pecl-memcache.x86_64
    Than I tried to add through Software > Module Installers > PHP Pecl It complained about:
    checking for libmemcached location... configure: error: memcached support requires libmemcached. Use --with-libmemcached-dir= to specify the prefix where libmemcached headers and library are located ERROR: `/root/tmp/pear/memcached/configure --with-php-config=/usr/local/bin/php-config --with-libmemcached-dir=no' failed The memcached.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20131226
    So I did:
    yum install cyrus-sasl-devel cd ~ wget http://launchpad.net/libmemcached/1.0/1.0.4/+download/libmemcached-1.0.4.tar.gz tar -zxvf libmemcached-1.0.4.tar.gz cd libmemcached-1.0.4 ./configure make && make install pecl install memcached
    That still didn't get it going I had to again rebuild through Software > Module Installers > PECL > Memcached After that everything for the most part worked fine as long as using port instead of socket. i did actually have it working on socket but than I resized /tmp and ever since than I get the behavior I posted about.
    0
  • User Avatar
    cPanelMichael
    i did actually have it working on socket but than I resized /tmp and ever since than I get the behavior I posted about.

    Have you tried reverting your /tmp partition to it's original state? Also, what are the current permissions and mount options for your /tmp partition? Thank you.
    0
  • User Avatar
    Dradden45
    Out of the blue working now, no idea why now it works nothing changed. Will have to see if it persists after the next reboot. Thanks for the help.
    0
  • User Avatar
    cPanelMichael
    I am happy to see it's now working well. Thank you for updating us with the outcome.
    0

Please sign in to leave a comment.