Skip to main content

second drive not mounted

Gojko

fdisk -l Disk /dev/nvme0n1: 512.1 GB, 512110190592 bytes, 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0xdc713f1e Device Boot Start End Blocks Id System /dev/nvme0n1p1 2048 67110911 33554432 fd Linux raid autodetect /dev/nvme0n1p2 67110912 68159487 524288 fd Linux raid autodetect /dev/nvme0n1p3 68159488 1000213167 466026840 fd Linux raid autodetect Disk /dev/nvme1n1: 512.1 GB, 512110190592 bytes, 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0xefbd8386 Device Boot Start End Blocks Id System /dev/nvme1n1p1 2048 67110911 33554432 fd Linux raid autodetect /dev/nvme1n1p2 67110912 68159487 524288 fd Linux raid autodetect /dev/nvme1n1p3 68159488 1000213167 466026840 fd Linux raid autodetect Disk /dev/md1: 536 MB, 536281088 bytes, 1047424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/md0: 34.3 GB, 34326183936 bytes, 67043328 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/md2: 477.1 GB, 477077241856 bytes, 931791488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT nvme0n1 259:0 0 477G 0 disk ??nvme0n1p1 259:2 0 32G 0 part ? ??md0 9:0 0 32G 0 raid1 [SWAP] ??nvme0n1p2 259:3 0 512M 0 part ? ??md1 9:1 0 511.4M 0 raid1 /boot ??nvme0n1p3 259:5 0 444.4G 0 part ??md2 9:2 0 444.3G 0 raid1 / nvme1n1 259:1 0 477G 0 disk ??nvme1n1p1 259:4 0 32G 0 part ? ??md0 9:0 0 32G 0 raid1 [SWAP] ??nvme1n1p2 259:6 0 512M 0 part ? ??md1 9:1 0 511.4M 0 raid1 /boot ??nvme1n1p3 259:7 0 444.4G 0 part ??md2 9:2 0 444.3G 0 raid1 /
What i need to set up in "basic webhost manager setup" "Additional home directories matching the following value will also be used for new home directory creations. (Leaving this value blank disables the feature.) This option only takes one value."? Why WHM don't see second drive? This is in WHM system information:
Current Disk Usage Filesystem Size Used Avail Use% Mounted on /dev/md2 438G 53G 363G 13% / devtmpfs 32G 0 32G 0% /dev tmpfs 32G 0 32G 0% /dev/shm tmpfs 32G 153M 32G 1% /run tmpfs 32G 0 32G 0% /sys/fs/cgroup /dev/md1 488M 169M 294M 37% /boot tmpfs 6.3G 0 6.3G 0% /run/user/0

Comments

6 comments

Date Votes
  • cPanelMichael
    Hello, Please post the output from the following commands:
    cat /etc/fstab mount
    Thank you.
    0
  • Gojko

    cat /etc/fstab proc /proc proc defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 tmpfs /dev/shm tmpfs defaults 0 0 sysfs /sys sysfs defaults 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 usrjquota=quota.user,jqfmt=vfsv0 0 0
    0
  • cPanelMichael
    Hello, I recommend reaching out to your data center or hosting provider to let them know you want the additional drive mounted as /home2 for the purpose of additional space as opposed to RAID1. This isn't something you can configure with the cPanel/WHM software. Thank you.
    0
  • Gojko
    They said support don't include software support only hardware. So i need to do my self. I searched on google and found edit /etc/fstab
    /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 usrjquota=quota.user,jqfmt=vfsv0 0 0
    so i suppose i need in third line change from "/dev/md/2 / ext4..." to "/dev/md/2 /home2 ext4..."? and run "mount -a"? and i see there is ext3 and ext4, is there a problem or not?
    0
  • Gojko
    Well that is not possible. I have my two HDD in raid1 so they working as one hdd. If i want to unlink them i need to reinstall OS completely. This problem is solved.
    0
  • cPanelMichael
    Well that is not possible. I have my two HDD in raid1 so they working as one hdd. If i want to unlink them i need to reinstall OS completely. This problem is solved.

    Hello, Thank you for updating us with the outcome.
    0

Please sign in to leave a comment.

Didn't find what you were looking for?

New post